Both Screws SGP-VA Standard Nipple
Basic Info
Model No.: 1/2B-50L
Product Description
Both Screws SGP-VA Standard Nipple
-
Material standard
SGP-VA Hard PVC lined steel pipe for water supply (JWWA K116) Carbon steel pipe for SGP piping Black (JIS G3452) with primary antirust coating on the outer surface and hard vinyl chloride resin (JIS K6742) on the inner surface. Excellent corrosion resistance, oil resistance, and chemical resistance on the inner surface of the pipe. Since the inner surface is a smooth hard vinyl chloride resin, the frictional resistance is small and changes in flow rate and flow velocity inside the pipe can be minimized. Instead of the conventional hot-dip galvanized steel pipe, it is also used for water supply piping for general households, and it is also used for air conditioning cooling water and industrial water, and can be used in a wide range. -
Application
Mainly for indoor water supply piping -
Screw standard
An external thread type pipe joint that requires a taper male thread [symbol: R (PT)]. (Compliant with JIS B0203) Suitable for joining screws with the main purpose of tightness resistance when joining internally threaded pipe fittings, other pipe parts, fluid equipment, etc. It is suitable for the case where the exterior process, electroplating, welding, and bending are performed in the post-process. -
Maximum working pressure
1MPa -
Mechanical strength
Same as SGP steel pipe. -
Recommended temperature
0 to 40 ° C when using pipe end anti-corrosion fittings -
About inspection of screw
All thread inspections are performed using a taper thread gauge specified in the standard number (JIS B0253) defined by the Japanese Industrial Standards (JIS standard). In addition, our inspection gauge manufacturer uses OSG (OSG). -
Join method
When tightening, after tightening by hand, it is necessary to tighten with torque using a tool such as a pipe wrench. However, in order to tightly bond, even if it is tightened tightly, there is a slight space between the top and bottom of the mountain in practical use, and perfect airtightness cannot be secured. Therefore, it is necessary to take measures such as wrapping seal tape (tape-like gap filling material) around the screw before assembly or applying the same liquid sealant. (It is necessary to select the type of sealing material suitable for the piping application.) Also, when assembling in a place where attention is paid to leakage, seal tape (about 2 to 3 turns) is wound around the external thread. Apply sealant from the top, and then apply sealant on the female screw side and tighten it to ensure tightness. -
Inspection pressure
Leakage(pneumatic) 0.5Mpa(5.1kgf/cm2) Pressure resistance(water pressure) 2.5Mpa(25.5kgf/cm2) -
Type, symbol, chemical composition
Type Symbol Chemical composition(%) P S Carbon steel pipe for piping SGP 0.040 or less 0.040 or less
Contact us if you need more details on Good Use External Screw Thread Nipple. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Good Quality External Male Thread Nipple、Nipple For Water Supply. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : SGP-VA Standard Nipple > Both Screws SGP-VA Standard Nipple
Hot Products
Leite Stainless Steel Countersunk BoltsDog Bolt with Wing NutInternal Circlip DIN472High Strength BoltTunnel Car WasherThread Depth Gauge for Tyre (TDG-01)EPDM Tyre Valve for Car (TR41)Fe-Fn Series Wheel Balance WeightSnow Steel Wheel for Car (14~17 inch)Wheel Spacer for Car (HS1)6061-T6 Wheel Adapter for CarNut Cover for Car WheelWheel Lug Bolts for Car WheelEt Bulge Lug Nuts for CarMag Lug Nuts for CarWheel Lug Nuts for Car